AGL 6.0.0 booting on R-Car H3 not completed

Hi, I report because this issue progress has changed.

I seemed that the U-boot parameters(discribed at http://docs.automotivelinux.org/docs/getting_started/en/dev/reference/machines/R-Car-Starter-Kit-gen3.html) were wrong from the previous Booting log.

[ 2.693689] mmcblk0: mmc0:aaaa SL16G 14.8 GiB
[ 2.701819] mmcblk0: p1
[ 2.720635] usb 1-1.4: new full-speed USB device number 4 using ehci-platform
[ 4.448658] md: Skipping autodetection of RAID arrays. (raid=autodetect will force)
[ 4.456436] Waiting for root device /dev/mmcblk1p1...

So, I tried changing the device name from "/dev/mmcblk1p1" to "/dev/mmcblk0p1".
And reboot, the shell is launched completely but home-screen is not shown at hdmi-display yet.
The kernel outputs trace log of WARNING below.

[ 16.128912] -----------[ cut here ]-----------
[ 16.133663] WARNING: CPU: 1 PID: 54 at /mnt/AGL/workspace_agl_ff_6.0.0_rcar/build-h3/tmp/work/h3ulcb-agl-linux/kernel-module-gles/1.0-r0/rogue_km/binary_r8a7795_linux_release/target_aarch64/kbuild/services/server/devices/rgx/rgxfwutils.c:4115 RGXCheckFirmwareCCB+0x210/0x330 [pvrsrvkm]
[ 16.160150] Modules linked in: can_bcm can bnep nfc btwilink st_drv bluetooth ecdh_generic rfkill crc32_ce crct10dif_ce pvrsrvkm(O) vspm_if(O) vsp2(O) vspm(O) uvcs_drv(O) mmngrbuf(O) mmngr(O) hdm_usb(O) hdm_i2c(O) hdm_dim2(O) aim_v4l2(O) aim_sound(O) aim_network(O) aim_cdev(O) mostcore(O) ipv6
[ 16.186172] CPU: 1 PID: 54 Comm: kworker/u16:2 Tainted: G O 4.14.0-yocto-standard #1
[ 16.195037] Hardware name: Renesas H3ULCB board based on r8a7795 ES1.x (DT)
[ 16.202108] Workqueue: pvr_workqueue MISRWrapper [pvrsrvkm]
[ 16.207676] task: ffff8006fae20000 task.stack: ffff000009b40000
[ 16.213698] PC is at RGXCheckFirmwareCCB+0x210/0x330 [pvrsrvkm]
[ 16.219761] LR is at RGXCheckFirmwareCCB+0x210/0x330 [pvrsrvkm]
[ 16.225676] pc : [<ffff000000ce6e28>] lr : [<ffff000000ce6e28>] pstate: 60000145
[ 16.233063] sp : ffff000009b43d60
[ 16.236371] x29: ffff000009b43d60 x28: 0000000000000000
[ 16.241680] x27: 0000000000000000 x26: ffff0000210790a0
[ 16.246988] x25: 0000000070014008 x24: ffff8006f4a705e8
[ 16.252296] x23: ffff000000d45618 x22: ffff8006f4a70000
[ 16.257603] x21: ffff000021079080 x20: 0000000000000020
[ 16.262911] x19: ffff000021079040 x18: 0000000000000010
[ 16.268219] x17: 00000000000012c8 x16: 00000000000012cc
[ 16.273526] x15: 0000000000000001 x14: 0000000000000400
[ 16.278833] x13: 0000000000000400 x12: 0000000000000000
[ 16.284141] x11: 0000000000000005 x10: 0000000000000000
[ 16.289448] x9 : 00000000006cd4b7 x8 : ffff8006ffeea6c0
[ 16.294756] x7 : ffff8006ffeea668 x6 : 00000000000000a7
[ 16.300063] x5 : 0000000000000001 x4 : ffff0000091d2c00
[ 16.305370] x3 : 00000000000f4240 x2 : ffff8006fa5e7088
[ 16.310678] x1 : 0000000000000000 x0 : 0000000000000002
[ 16.315986] Call trace:
[ 16.318427] Exception stack(0xffff000009b43c20 to 0xffff000009b43d60)
[ 16.324862] 3c20: 0000000000000002 0000000000000000 ffff8006fa5e7088 00000000000f4240
[ 16.332684] 3c40: ffff0000091d2c00 0000000000000001 00000000000000a7 ffff8006ffeea668
[ 16.340507] 3c60: ffff8006ffeea6c0 00000000006cd4b7 0000000000000000 0000000000000005
[ 16.348329] 3c80: 0000000000000000 0000000000000400 0000000000000400 0000000000000001
[ 16.356152] 3ca0: 00000000000012cc 00000000000012c8 0000000000000010 ffff000021079040
[ 16.363974] 3cc0: 0000000000000020 ffff000021079080 ffff8006f4a70000 ffff000000d45618
[ 16.371796] 3ce0: ffff8006f4a705e8 0000000070014008 ffff0000210790a0 0000000000000000
[ 16.379619] 3d00: 0000000000000000 ffff000009b43d60 ffff000000ce6e28 ffff000009b43d60
[ 16.387441] 3d20: ffff000000ce6e28 0000000060000145 ffff000009b43d60 ffff000000ce6e28
[ 16.395263] 3d40: ffffffffffffffff 0000000000000020 ffff000009b43d60 ffff000000ce6e28
[ 16.403248] [<ffff000000ce6e28>] RGXCheckFirmwareCCB+0x210/0x330 [pvrsrvkm]
[ 16.410302] [<ffff000000ce893c>] RGX_MISRHandler+0x24/0x38 [pvrsrvkm]
[ 16.416840] [<ffff000000cb5058>] MISRWrapper+0x18/0x20 [pvrsrvkm]
[ 16.422935] [<ffff0000080e06bc>] process_one_work+0x1d4/0x348
[ 16.428675] [<ffff0000080e0878>] worker_thread+0x48/0x470
[ 16.434070] [<ffff0000080e6b64>] kthread+0x12c/0x130
[ 16.439033] [<ffff000008084c10>] ret_from_fork+0x10/0x18
[ 16.444339] --[ end trace da55878e442ea43e ]--

I should do something else?
Perhaps, my knowledge may be missing, but I appreciate if someone let me know advice to solve it.

Gumma (talk)

Ygohda (talk)

Thank you for letting me know it.

I found that I'm not happy, but I will find someone who already has H3 v2.0 SK or M3 SK.

Gumma (talk)