Thread history

Fragment of a discussion from Talk:R-Car/Boards/Yocto-Gen3
Viewing a history listing
Jump to: navigation, search
Time User Activity Comment
No results

Yes, /tmp/deploy/images/h3ulcb is correct path. Please refer to the No13 of http://elinux.org/R-Car/Boards/Yocto-Gen3#Building_the_BSP_for_Renesas_H3ULCB.2C_M3ULCB.

All updating methods are described below. http://elinux.org/R-Car/Boards/H3SK#Flashing_firmware Could you try again?

If "u-boot" still doesn't start up please attach the log when flashing the firmware.

Ygohda (talk)

‎04:03, 21 July 2017

Rebuilding the whole thing from scratch worked. Something must have gone wrong in the initial build because the .dtb file sizes between the two builds were off by a few hundred bytes.

Eli.sherman (talk)

‎23:38, 22 July 2017
 
Retrieved from "https://elinux.org/Thread:Talk:R-Car/Boards/Yocto-Gen3/Can%27t_Modify_U-Boot_Environment_Variables_on_Updated_Firmware/reply_(6)#Can.27t_Modify_U-Boot_Environment_Variables_on_Updated_Firmware_3241"