Enabling Reset button/Power button functionality on Kingfisher + M3 Starter Kit
← Thread:Talk:R-Car/Boards/Yocto-Gen3/Enabling Reset button/Power button functionality on Kingfisher + M3 Starter Kit/reply
According to the schematic the power supply seems to be controlled from Kingfisher(M05). I think you can not control power from SW8.
Is there any switch/workaround to reset the kingfisher board ? Or would this be considered as a hardware limitation and no work around possible ? Although we would hope this is not the case.
SW9 on Starter Kit can reset to CPU( and devices on Starter Kit).
However it cannot reset to devices on Kingfisher.
Why do you need reset rather than SW6 on Kingfisher?
You do not have permission to edit this page, for the following reasons:
- The action you have requested is limited to users in the group: Users.
- You must confirm your email address before editing pages. Please set and validate your email address through your user preferences.
You can view and copy the source of this page.
KF doesn't support Suspend to RAM(S2R).
In order to support S2R on SK+KF, it is necessary to redesign the power control schematics on KF.
(I have never heard of such a plan.)