Difference between revisions of "Thread:Talk:R-Car/Boards/Yocto-Gen3/I2C errors appeared with multiple usb devices/reply (2)"

From eLinux.org
Jump to: navigation, search
 
m
 
(One intermediate revision by the same user not shown)
Line 1: Line 1:
 +
 
As a result of our confirmation again, it can be reproduced, even if the USB device is not connected.
 
As a result of our confirmation again, it can be reproduced, even if the USB device is not connected.
 
Let me share the reproduction the scenario below.
 
Let me share the reproduction the scenario below.
Line 4: Line 5:
  
 
[ Reproduce environment ]
 
[ Reproduce environment ]
 +
 
- Renesas bsp 3.15
 
- Renesas bsp 3.15
 
- Rcar M3 StarterKit + KF-M06
 
- Rcar M3 StarterKit + KF-M06
Line 19: Line 21:
  
 
[pattern1]
 
[pattern1]
 +
 
[ 1491.549362] i2c-rcar e66d8000.i2c: error -11 : f
 
[ 1491.549362] i2c-rcar e66d8000.i2c: error -11 : f
  
 
[pattern2]
 
[pattern2]
 +
 
[ 1443.614690] i2c-rcar e66d8000.i2c: error -110 : 3
 
[ 1443.614690] i2c-rcar e66d8000.i2c: error -110 : 3
  

Latest revision as of 06:08, 1 April 2019

As a result of our confirmation again, it can be reproduced, even if the USB device is not connected. Let me share the reproduction the scenario below. In addition, I used another board butI2C error is still reproduced.

[ Reproduce environment ]

- Renesas bsp 3.15 - Rcar M3 StarterKit + KF-M06 - CMOS Camera OV5642

 https://
    www.aliexpress.com/item/OV5642-5-Million-High-Sensitivity-Camera-Module-Image-Sensor-Module-Manual-Fine-tuning-with-JPEG-Interface/32909308847.html
 Connected CMOS Camera to CN 29 on KF-M06.

- capture command

 Customized based on V4L2 video capture example in here.
 https://
    linuxtv.org/downloads/v4l-dvb-apis-new/uapi/v4l/capture.c.html
 please see the attached file.
 
 # capture -d /dev/video0 -F -f rgb32 -L 0 -T 0 -W 12800 -H 720 -c 1000 -t 60 -z

[pattern1]

[ 1491.549362] i2c-rcar e66d8000.i2c: error -11 : f

[pattern2]

[ 1443.614690] i2c-rcar e66d8000.i2c: error -110 : 3

When capture command was executed, I2C bus error occurs probability as below. pattern1: 3/10. pattern2: 4/10.

Your feedback would be welcome. Thanks