Difference between revisions of "Thread:Talk:R-Car/Boards/Yocto-Gen3/I2C errors appeared with multiple usb devices/reply (2)"

From eLinux.org
Jump to: navigation, search
m
m
 
Line 5: Line 5:
  
 
[ Reproduce environment ]
 
[ Reproduce environment ]
 +
 
- Renesas bsp 3.15
 
- Renesas bsp 3.15
 
- Rcar M3 StarterKit + KF-M06
 
- Rcar M3 StarterKit + KF-M06
Line 20: Line 21:
  
 
[pattern1]
 
[pattern1]
 +
 
[ 1491.549362] i2c-rcar e66d8000.i2c: error -11 : f
 
[ 1491.549362] i2c-rcar e66d8000.i2c: error -11 : f
  
 
[pattern2]
 
[pattern2]
 +
 
[ 1443.614690] i2c-rcar e66d8000.i2c: error -110 : 3
 
[ 1443.614690] i2c-rcar e66d8000.i2c: error -110 : 3
  

Latest revision as of 06:08, 1 April 2019

As a result of our confirmation again, it can be reproduced, even if the USB device is not connected. Let me share the reproduction the scenario below. In addition, I used another board butI2C error is still reproduced.

[ Reproduce environment ]

- Renesas bsp 3.15 - Rcar M3 StarterKit + KF-M06 - CMOS Camera OV5642

 https://
    www.aliexpress.com/item/OV5642-5-Million-High-Sensitivity-Camera-Module-Image-Sensor-Module-Manual-Fine-tuning-with-JPEG-Interface/32909308847.html
 Connected CMOS Camera to CN 29 on KF-M06.

- capture command

 Customized based on V4L2 video capture example in here.
 https://
    linuxtv.org/downloads/v4l-dvb-apis-new/uapi/v4l/capture.c.html
 please see the attached file.
 
 # capture -d /dev/video0 -F -f rgb32 -L 0 -T 0 -W 12800 -H 720 -c 1000 -t 60 -z

[pattern1]

[ 1491.549362] i2c-rcar e66d8000.i2c: error -11 : f

[pattern2]

[ 1443.614690] i2c-rcar e66d8000.i2c: error -110 : 3

When capture command was executed, I2C bus error occurs probability as below. pattern1: 3/10. pattern2: 4/10.

Your feedback would be welcome. Thanks