Difference between revisions of "Tigal:BeagleBone ProtoCape"
|Line 27:||Line 27:|
Revision as of 08:24, 13 January 2014
The BeagleBone Proto Cape is designed to provide a simple but productive prototyping space. This prototyping cape is equipped with a patterned prototyping area, two general LEDs, two tactile switches, one 8-pin female header and two stackable 46-pin connectors. LEDs and switches are wired to an 5-pin header for convenient access.
BeagleBone Proto Cape Features:
- Two tactile switches
- Two general LEDs with resistors
- Header access to LEDs and switches
- Stackable connectors
This is the first revision.
No software support is required by this board.
Followings are some specifications of the BeagleBone Breadboard:
|Headers||1x HEADER FEMALE 4 pin|
|Headers||1x HEADER FEMALE 6 pin LeadLenght 10mm (supplied but unpopulated)|
|Headers||2x HEADER FEMALE 2×23 pin LeadLenght 10mm|
|Resistors||2x RESISTOR 1k 5% 0603|
|Resistors||2x RESISTOR 100k 5% 0603|
|Resistors||4x RESISTOR 10k 5% 0603|
|LED´S||2x LED 0603 GREEN|
|Switches||2x TACTILE SWITCH 6×3.5mm smd|
|MOSFET||2x N-Channel 100mA SOT23|
|Size||86.3 mm x 54.6 mm|
|PCB Thickness||1.64 mm|
No signals are used by this cape.
|Board Name||TIGAL - BeagleBone Proto Cape|
BeagleBone Breadboard Revision 1
To go back to the cape list, please click here