Difference between revisions of "UDOO"

From eLinux.org
Jump to: navigation, search
(Community information added)
(37 intermediate revisions by 7 users not shown)
Line 1: Line 1:
[[File:UDOO_quad.jpg|200px|thumb|right|UDOO]] This page collects information about UDOO [http://www.udoo.org www.udoo.org] the first ever small sized computer that marges in one single board an ARM cortex-A9 iMX.6 CPU and an Arduino compatible board embedded with a dedicated ARM SAM3X CPU. [http://www.kickstarter.com/projects/435742530/udoo-android-linux-arduino-in-a-tiny-single-board UDOO project has been funded trough Kickstarter], rising $641,614 in sixty days thanks to 4,172 backers.
+
[[File:UDOO_quad.jpg|200px|thumb|right|UDOO]] This page collects information about UDOO [http://www.udoo.org www.udoo.org] the first ever small sized computer that merges in one single board an ARM cortex-A9 iMX.6 CPU and an Arduino compatible board embedded with a dedicated ARM SAM3X CPU. [http://www.kickstarter.com/projects/435742530/udoo-android-linux-arduino-in-a-tiny-single-board UDOO project has been funded through Kickstarter], raising $641,614 in sixty days thanks to 4,172 backers.
  
 
''Notice: The UDOO Wiki pages on this site is collaborative work - the UDOO team is not responsible for content on these pages.''
 
''Notice: The UDOO Wiki pages on this site is collaborative work - the UDOO team is not responsible for content on these pages.''
  
 
= What's UDOO? =
 
= What's UDOO? =
UDOO is a mini PC that could run either Android or Linux, with an Arduino-compatible board embedded. It is a powerful prototyping board for software development and design, it’s easy to use and allows to create projects with minimum knowledge. UDOO merges different computing worlds in one; each world has its strengths and weaknesses, and all of them are useful today in education as well as Do-It-Yourself (DIY) and rapid prototyping endeavours. UDOO is an open hardware, low-cost computer equipped with an ARM i.MX6 Freescale processor for Android and Linux, alongside  Arduino DUE’s ARM SAM3X, both CPU integrated on the same board!
+
UDOO is a mini PC that can be used both with Android and Linux OS, with an embedded Arduino-compatible board. It is a powerful prototyping board for software development and design; it’s easy to use and allows developing projects with minimum knowledge of hardware. UDOO merges different computing worlds together: each one has its proper strenght- and weak- points, but all of them are useful in today's life for educational purposes as well as Do-It-Yourself (DIY) and quick prototyping. UDOO is an open hardware, low-cost platform equipped with an ARM i.MX6 Freescale processor, and an Arduino Due compatible section based on ATMEL SAM3X ARM processor, all this available on the same board!
  
 
== UDOO goals: ==
 
== UDOO goals: ==
* Develop an innovative product for a growing market
+
*Develop an innovative product for a growing market
* Give a new vision to the educational framework: the idea is to train up a new generation of engineers, designers and software developers skilled in digital technology: physical computing, multi-media arts, interactive arts, IoT...
+
*Give a new vision to the educational framework, with the idea of training up a new generation of engineers, designers and software developers skilled in digital technology: physical computing, multi-media arts, interactive arts, IoT...
* Boost up the DIY world
+
*Give a boost to the DIY world
* Offer a low cost embedded platform for interactive art with powerful tools: Processing, OpenCV, PureData, openFramework
+
*Offer a low cost embedded platform for interactive arts with powerful tools: Processing, OpenCV, PureData, openFramework
* Provide companies with a great tool for fast prototyping
+
*Provide companies with a great tool for fast prototyping
  
 
= Specifications =
 
= Specifications =
UDOO retail line up consist of three models that share most features with just slightly differences in term of connections and CPU power. All the three models features an embedded Arduino compatible board based on Arduino DUE schematic. UDOO’s size are 4.33 inch x 3.35 inch (11 cm x 8.5 cm).
+
UDOO retail line up consists of three models, sharing most of the featuresand different only for connectivity and i.MX6 processor used. All three models feature an embedded Arduino compatible section based on Arduino Due schematic. UDOO’s size are 4.33 inch x 3.35 inch (11 cm x 8.5 cm).
 +
 
 +
'''Warning: The UDOO I/O pins are 3.3V compliant. Higher voltages (like 5V) would damage the board.'''
 +
 
 +
Learn more about [http://www.udoo.org/faq-items/what-are-the-wrong-uses-that-invalidate-the-warranty/ wrong uses that invalidate the warranty].
  
 
== GPIO features ==
 
== GPIO features ==
[Description needed]
+
The retail version of UDOO, compared to the first beta version releases has these additional features:
Current version, UDOO rev. C, has these additional features:
+
*S/PDIF digital audio in & out through pin headers;
* S/PDIF digital audio in & out through pin headers;
+
*I2S/AC97/SSI digital audio multiplexer through pin headers;
* I2S/AC97/SSI digital audio multiplexer through pin headers;
+
*FlexCAN (Flexible Controller Area Network) through pin headers, it is possible to switch this function’s management between i.MX6 processor and SAM3X8E processor;
* FlexCAN (Flexible Controller Area Network) through pin headers, you will be able to choose if you want to switch this function to the iMX6 or the SAM3X;
+
*External SD card support through pins header: plug an external controller for an additional SD card slot or for an eMMC module.
* Second SD card support through pins header: this means you can plug an external controller for a second SD card or an external controller for an eMMC module
 
  
 
==UDOO Quad ==
 
==UDOO Quad ==
[Description needed]
+
*Freescale i.MX6Quad, 4 x ARM® Cortex™-A9 core @ 1GHz with ARMv7A instruction set
* Freescale i.MX 6 ARM Cortex-A9 CPU Quad core 1GHz with ARMv7A instruction set
+
*GPU Vivante GC 2000 for 3D + Vivante GC 355 for 2D (vector graphics) + Vivante GC 320 for 2D (composition)
* GPU Vivante GC 2000 for 3D + Vivante GC 355 for 2D (vector graphics) + Vivante GC 320 for 2D (composition)
+
*Atmel SAM3X8E ARM Cortex-M3 CPU (same as Arduino Due)
* Accelerators for 2D, OpenGL® ES2.0 3D and OpenVG™
+
*RAM DDR3 1GB
* Atmel SAM3X8E ARM Cortex-M3 CPU (same as Arduino DUE)
+
*76 fully available GPIO with Arduino-compatible R3 1.0 pinout
* RAM DDR3 1GB
+
*HDMI and LVDS + Touch
* 76 fully available GPIO with Arduino-compatible R3 1.0 pinout
+
*2 Micro USB (1 OTG)
* HDMI and LVDS + Touch
+
*2 USB 2.0 type A and 1 USB 2.0 internal pin header (requires adapter cable)
* 2 Micro USB (1 OTG type a+b)
+
*Analog Audio and Mic jacks
* 2 USB type A (x2) and 1 USB connector (requires a specific wire)
+
*CSI Camera Connection
* Analog Audio and Mic
+
*on board Micro SD card reader (boot device)
* CSI Camera Connection
+
*Power Supply (6-15V) and External Battery connector
* on board Micro SD card reader reader (boot device)
+
*Ethernet RJ45 (10/100/1000 MBit)
* Power Supply (6-15V) and External Battery connector
+
*WiFi Module
* Ethernet RJ45 (10/100/1000 MBit)
+
*SATA connector with power header
* WiFi Module
 
* SATA connector with power plug
 
  
 
==UDOO Dual ==
 
==UDOO Dual ==
[Description needed]
+
*Freescale i.MX6DualLite, 2x ARM® Cortex™-A9 core @ 1GHz with ARMv7A instruction set
* Freescale i.MX 6 ARM Cortex-A9 CPU Dual core 1GHz with ARMv7A instruction set
+
*GPU Vivante GC 880 for 3D and 2D (vector graphics) + Vivante GC 320 for 2D (composition)
* GPU Vivante GC 880 for 3D and 2D (vector graphics) + Vivante GC 320 for 2D (composition)
+
*Atmel SAM3X8E ARM Cortex-M3 CPU (same as Arduino Due)
* Accelerators for 2D, OpenGL® ES2.0 3D and OpenVG™
+
*RAM DDR3 1GB
* Atmel SAM3X8E ARM Cortex-M3 CPU (same as Arduino DUE)
+
*76 fully available GPIO with Arduino-compatible R3 1.0 pinout
* RAM DDR3 1GB
+
*HDMI and LVDS + Touch
* 76 fully available GPIO with Arduino-compatible R3 1.0 pinout
+
*2 Micro USB (1 OTG)
* HDMI and LVDS + Touch
+
*2 USB 2.0 type A and 1 USB 2.0 internal pin header (requires adapter cable)
* 2 Micro USB (1 OTG type a+b)
+
*Analog Audio and Mic jacks
* 2 USB type A (x2) and 1 USB connector (requires a specific wire)
+
*CSI Camera Connection
* Analog Audio and Mic
+
*on board Micro SD card reader (boot device)
* CSI Camera Connection
+
*Power Supply (6-15V) and External Battery connector
* on board Micro SD card reader reader (boot device)
+
*Ethernet RJ45 (10/100/1000 MBit)
* Power Supply (6-15V) and External Battery connector
+
*WiFi Module
* Ethernet RJ45 (10/100/1000 MBit)
 
* WiFi Module
 
* SATA connector with power plug
 
  
 
==UDOO Dual Basic ==
 
==UDOO Dual Basic ==
[Description needed]
+
*Freescale i.MX6DualLite, 2x ARM® Cortex™-A9 core @ 1GHz with ARMv7A instruction set
* Freescale i.MX 6 ARM Cortex-A9 CPU Dual core 1GHz with ARMv7A instruction set
+
*GPU Vivante GC 880 for 3D and 2D (vector graphics) + Vivante GC 320 for 2D (composition)
* GPU Vivante GC 880 for 3D and 2D (vector graphics) + Vivante GC 320 for 2D (composition)
+
*Atmel SAM3X8E ARM Cortex-M3 CPU (same as Arduino Due)
* Accelerators for 2D, OpenGL® ES2.0 3D and OpenVG™
+
*RAM DDR3 1GB
* Atmel SAM3X8E ARM Cortex-M3 CPU (same as Arduino DUE)
+
*76 fully available GPIO with Arduino-compatible R3 1.0 pinout
* RAM DDR3 1GB
+
*HDMI and LVDS + Touch
* 76 fully available GPIO with Arduino-compatible R3 1.0 pinout
+
*2 Micro USB (1 OTG)
* HDMI and LVDS + Touch
+
*2 USB 2.0 type A and 1 USB 2.0 internal pin header (requires adapter cable)
* 2 Micro USB (1 OTG type a+b)
+
*Analog Audio and Mic jacks
* 2 USB type A (x2) and 1 USB connector (requires a specific wire)
+
*CSI Camera Connection
* Analog Audio and Mic
+
*on board Micro SD card reader (boot device)
* CSI Camera Connection
+
*Power Supply (6-15V) and External Battery connector
* on board Micro SD card reader reader (boot device)
+
 
* Power Supply (6-15V) and External Battery connector
+
= Tutorials  =
 +
== Getting started ==
 +
An easy step by step guide that will lead you through the procedure to [http://www.elinux.org/UDOO_Getting_started boot your UDOO for the very first time].
 +
 
 +
== Creating a bootable Micro SD card from precompiled image ==
 +
How to [http://www.elinux.org/UDOO_creating_a_bootable_Micro_SD_card_from_precompiled_image create a bootable micro SD card for UDOO] board, starting from a precompiled image file containing the UDOO Operating system, which runs using the i.MX6 processor.
 +
 
 +
== Creating a bootable Micro SD card from binaries ==
 +
How to [http://www.elinux.org/UDOO_creating_a_bootable_Micro_SD_card_from_precompiled_binaries create a bootable Micro SD card from precompiled binaries].
 +
 
 +
== How to program the embedded Arduino microcontroller ==
 +
How to [http://www.elinux.org/UDOO_programming_the_embedded_Arduino_microcontroller program the embedded Arduino microcontroller]
 +
 
 +
== How to install Debian with debootstrap ==
 +
How to [http://www.elinux.org/UDOO_Installing_Debian_With_Debootstrap install Debian with debootstrap]
  
= Getting Started =
+
== How to boot from a SATA drive ==
[Description needed]
+
How to [http://www.elinux.org/UDOO_boot_from_sata boot from SATA drive]
  
 
= Resources =
 
= Resources =
Line 85: Line 97:
  
 
= Community =
 
= Community =
[Description needed]
+
 
 +
'''IRC'''
 +
There is an (unofficial) Udoo discussion channel on IRC.
 +
Using the IRC client of your choice, use server information: irc.freenode.net. Room name is #udoo.
 +
 
 +
'''Forums'''
 +
The official Udoo forums can be found at http://www.udoo.org/forum  Please note, currently the forums are heavily moderated. Before you can start a new thread, you'll need to respond to a couple other posts first. Typically it's a good idea to post a reply to the "Introduce Yourself" thread in the "General" section, to, well, introduce yourself.
 +
 
 +
Also, please use the search feature before posting to cut down on repetitive issue threads.
  
 
= References =
 
= References =
Line 97: Line 117:
 
# Google+ https://plus.google.com/u/0/110742692974455430878/posts
 
# Google+ https://plus.google.com/u/0/110742692974455430878/posts
 
# YouTube http://www.youtube.com/channel/UCXv5UyGn5jArK8xOAmuSeHg
 
# YouTube http://www.youtube.com/channel/UCXv5UyGn5jArK8xOAmuSeHg
 +
 +
[[Category:UDOO]]

Revision as of 14:29, 3 November 2013

UDOO

This page collects information about UDOO www.udoo.org the first ever small sized computer that merges in one single board an ARM cortex-A9 iMX.6 CPU and an Arduino compatible board embedded with a dedicated ARM SAM3X CPU. UDOO project has been funded through Kickstarter, raising $641,614 in sixty days thanks to 4,172 backers.

Notice: The UDOO Wiki pages on this site is collaborative work - the UDOO team is not responsible for content on these pages.

What's UDOO?

UDOO is a mini PC that can be used both with Android and Linux OS, with an embedded Arduino-compatible board. It is a powerful prototyping board for software development and design; it’s easy to use and allows developing projects with minimum knowledge of hardware. UDOO merges different computing worlds together: each one has its proper strenght- and weak- points, but all of them are useful in today's life for educational purposes as well as Do-It-Yourself (DIY) and quick prototyping. UDOO is an open hardware, low-cost platform equipped with an ARM i.MX6 Freescale processor, and an Arduino Due compatible section based on ATMEL SAM3X ARM processor, all this available on the same board!

UDOO goals:

  • Develop an innovative product for a growing market
  • Give a new vision to the educational framework, with the idea of training up a new generation of engineers, designers and software developers skilled in digital technology: physical computing, multi-media arts, interactive arts, IoT...
  • Give a boost to the DIY world
  • Offer a low cost embedded platform for interactive arts with powerful tools: Processing, OpenCV, PureData, openFramework
  • Provide companies with a great tool for fast prototyping

Specifications

UDOO retail line up consists of three models, sharing most of the featuresand different only for connectivity and i.MX6 processor used. All three models feature an embedded Arduino compatible section based on Arduino Due schematic. UDOO’s size are 4.33 inch x 3.35 inch (11 cm x 8.5 cm).

Warning: The UDOO I/O pins are 3.3V compliant. Higher voltages (like 5V) would damage the board.

Learn more about wrong uses that invalidate the warranty.

GPIO features

The retail version of UDOO, compared to the first beta version releases has these additional features:

  • S/PDIF digital audio in & out through pin headers;
  • I2S/AC97/SSI digital audio multiplexer through pin headers;
  • FlexCAN (Flexible Controller Area Network) through pin headers, it is possible to switch this function’s management between i.MX6 processor and SAM3X8E processor;
  • External SD card support through pins header: plug an external controller for an additional SD card slot or for an eMMC module.

UDOO Quad

  • Freescale i.MX6Quad, 4 x ARM® Cortex™-A9 core @ 1GHz with ARMv7A instruction set
  • GPU Vivante GC 2000 for 3D + Vivante GC 355 for 2D (vector graphics) + Vivante GC 320 for 2D (composition)
  • Atmel SAM3X8E ARM Cortex-M3 CPU (same as Arduino Due)
  • RAM DDR3 1GB
  • 76 fully available GPIO with Arduino-compatible R3 1.0 pinout
  • HDMI and LVDS + Touch
  • 2 Micro USB (1 OTG)
  • 2 USB 2.0 type A and 1 USB 2.0 internal pin header (requires adapter cable)
  • Analog Audio and Mic jacks
  • CSI Camera Connection
  • on board Micro SD card reader (boot device)
  • Power Supply (6-15V) and External Battery connector
  • Ethernet RJ45 (10/100/1000 MBit)
  • WiFi Module
  • SATA connector with power header

UDOO Dual

  • Freescale i.MX6DualLite, 2x ARM® Cortex™-A9 core @ 1GHz with ARMv7A instruction set
  • GPU Vivante GC 880 for 3D and 2D (vector graphics) + Vivante GC 320 for 2D (composition)
  • Atmel SAM3X8E ARM Cortex-M3 CPU (same as Arduino Due)
  • RAM DDR3 1GB
  • 76 fully available GPIO with Arduino-compatible R3 1.0 pinout
  • HDMI and LVDS + Touch
  • 2 Micro USB (1 OTG)
  • 2 USB 2.0 type A and 1 USB 2.0 internal pin header (requires adapter cable)
  • Analog Audio and Mic jacks
  • CSI Camera Connection
  • on board Micro SD card reader (boot device)
  • Power Supply (6-15V) and External Battery connector
  • Ethernet RJ45 (10/100/1000 MBit)
  • WiFi Module

UDOO Dual Basic

  • Freescale i.MX6DualLite, 2x ARM® Cortex™-A9 core @ 1GHz with ARMv7A instruction set
  • GPU Vivante GC 880 for 3D and 2D (vector graphics) + Vivante GC 320 for 2D (composition)
  • Atmel SAM3X8E ARM Cortex-M3 CPU (same as Arduino Due)
  • RAM DDR3 1GB
  • 76 fully available GPIO with Arduino-compatible R3 1.0 pinout
  • HDMI and LVDS + Touch
  • 2 Micro USB (1 OTG)
  • 2 USB 2.0 type A and 1 USB 2.0 internal pin header (requires adapter cable)
  • Analog Audio and Mic jacks
  • CSI Camera Connection
  • on board Micro SD card reader (boot device)
  • Power Supply (6-15V) and External Battery connector

Tutorials

Getting started

An easy step by step guide that will lead you through the procedure to boot your UDOO for the very first time.

Creating a bootable Micro SD card from precompiled image

How to create a bootable micro SD card for UDOO board, starting from a precompiled image file containing the UDOO Operating system, which runs using the i.MX6 processor.

Creating a bootable Micro SD card from binaries

How to create a bootable Micro SD card from precompiled binaries.

How to program the embedded Arduino microcontroller

How to program the embedded Arduino microcontroller

How to install Debian with debootstrap

How to install Debian with debootstrap

How to boot from a SATA drive

How to boot from SATA drive

Resources

[Description needed]

Community

IRC There is an (unofficial) Udoo discussion channel on IRC. Using the IRC client of your choice, use server information: irc.freenode.net. Room name is #udoo.

Forums The official Udoo forums can be found at http://www.udoo.org/forum Please note, currently the forums are heavily moderated. Before you can start a new thread, you'll need to respond to a couple other posts first. Typically it's a good idea to post a reply to the "Introduce Yourself" thread in the "General" section, to, well, introduce yourself.

Also, please use the search feature before posting to cut down on repetitive issue threads.

References

Home site and community

  1. Official web site http://www.udoo.org
  2. Official forum http://www.udoo.org/forum/index.php

Social account

  1. Facebook fan page http://www.facebook.com/udooboard
  2. Twitter http://twitter.com/UDOO_Board
  3. Google+ https://plus.google.com/u/0/110742692974455430878/posts
  4. YouTube http://www.youtube.com/channel/UCXv5UyGn5jArK8xOAmuSeHg