Difference between revisions of "Userspace Arduino:cape ideas 2"
Line 12: | Line 12: | ||
* [http://arduino.cc/en/Tutorial/BarometricPressureSensor SCP1000]: Barometric Pressure Sensor Module | * [http://arduino.cc/en/Tutorial/BarometricPressureSensor SCP1000]: Barometric Pressure Sensor Module | ||
+ | * [http://www.adafruit.com/products/1393 SHARP Memory Display]: A very cool display which is a cross between an e-ink display and an LCD. | ||
* | * |
Revision as of 11:06, 25 August 2013
Ideas for hardware for the Beaglebone Black, which can be used to interface with peripherals like SPI, I2C etc.
I2C
It would be advantageous to go with devices which have existing Arduino sketches, since they are more likely to be widely used and tested with. A quick check at a local vendor revealed the following common sensors/devices being used with the I2C bus
- BMP085: Barometric Pressure Sensor Module, [1]
- MPU-9150: Accelerometer + Gyro + Magnetometer [2]
- DS3231, DS1331 are very popular RTC chips and can be easily integrated using the Time library
SPI
- SCP1000: Barometric Pressure Sensor Module
- SHARP Memory Display: A very cool display which is a cross between an e-ink display and an LCD.