VGF-CP1

From eLinux.org
Revision as of 04:40, 17 July 2011 by Ja1uyn (talk | contribs) (Bootlog)
Jump to: navigation, search

Sony VAIO Canvas Online - Digital Picture Frame

http://bb.watch.impress.co.jp/cda/static/image/2008/05/07/cp101s.jpg

specification in brief:

  • Display Size: 7″
  • Pixel Format: 800 x 480
  • Internal Memory: 100MB (80MB for pic­tures, 15MB for audio)
  • External Storage: CF, MS, SD
  • Image Support: JPEG, BMP, PNG, GIF
  • Audio Support: MP3, WAV
  • CPU: 400Mhz ARM11 (i.MX31)
  • OS: Timesys Linux 2.6.19
  • Wireless: 802.11b/g
  • Availability: May 17, 2008

Firmware

Though the CP1 was available in the US and UK, there seems to be no english firmware for download available. Two japanes images are available. You can flash them by just placing the .IMG file in a sub-folder called 'Update'.

VGF-CP1 japanese firmware Ver.2.00.00.09032516: http://vcl.vaio.sony.co.jp/download/EP0000177017.html
.IMG File: http://dlv.update.sony.net/pub/vaio/download/EP0000177017/EP0000177017.img
VGF-CP1 japanese firmware Ver.1.01.00.08082520: http://vcl.vaio.sony.co.jp/download/EP0000162984.html
.IMG File: http://dlv.update.sony.net/pub/vaio/download/EP0000162984/EP0000162984.img

Bootlog

Captured with serial interface (115200,8,n,1) on MX31 UART1.


 Linux 2.6 Freescale MXC processor 


 Choose an option from below:

 1. Load kernel to RAM and then boot from [0x80008000]
 2. Change the Linux kernel destination loading address [0x80008000]
 3. Enter command line option for kernel
 4. Change command line option address [0x80000100]

   Please enter selection ->   Timeout occured 



 -->Booting from RAM...
 RAM size is 128MB

 Copying pages....

 -->Goint Start

 Copying pages....

 -->Goint Start
 -->Starting kernel...
 Uncompressing Linux............................................................................................................. done, booting the kernel.
 Linux version 2.6.19.2 (akatsuka@akatsuka2.sm.sony.co.jp) () #1 PREEMPT Fri Apr 25 10:29:51 JST 2008
 CPU: Some Random V6 Processor [4107b364] revision 4 (ARMv6TEJ), cr=00e5387f
 Machine: Sony IDAM
 Memory policy: ECC disabled, Data cache writeback
 CPU0: D VIPT write-back cache
 CPU0: I cache: 16384 bytes, associativity 4, 32 byte lines, 128 sets
 CPU0: D cache: 16384 bytes, associativity 4, 32 byte lines, 128 sets
 Built 1 zonelists.  Total pages: 32128
 Kernel command line: initrd=0x83000000,8M root=/dev/ram0 rw console=ttymxc0,115200 ip=on
 MXC IRQ initialized
 PID hash table entries: 512 (order: 9, 2048 bytes)
 Actual CLOCK_TICK_RATE is 16625000 Hz
 Console: colour dummy device 80x30
 Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
 Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
 Memory: 64MB 64MB = 128MB total
 Memory: 118072KB available (2416K code, 601K data, 472K init)
 Mount-cache hash table entries: 512
 CPU: Testing write buffer coherency: ok
 checking if image is initramfs...it isn't (no cpio magic); looks like an initrd
 Freeing initrd memory: 8192K
 NET: Registered protocol family 16
 MXC GPIO hardware
 system_rev is: 0x20
 Clock input source is 26000000
 Machine Type: iDAM
 L2 cache: WB
 Using SDMA I.API
 MXC DMA API initialized
 usb: Host 2 registered
 SCSI subsystem initialized
 CSPI: mxc_spi-0 probed
 CSPI: mxc_spi-1 probed
 usbcore: registered new interface driver usbfs
 usbcore: registered new interface driver hub
 usbcore: registered new device driver usb
 MXC I2C driver
 NET: Registered protocol family 23
 NET: Registered protocol family 2
 IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
 TCP established hash table entries: 4096 (order: 2, 16384 bytes)
 TCP bind hash table entries: 2048 (order: 1, 8192 bytes)
 TCP: Hash tables configured (established 4096 bind 2048)
 TCP reno registered
 Low-Level PM Driver module loaded
 JFFS2 version 2.2. (NAND) (SUMMARY)  (C) 2001-2006 Red Hat, Inc.
 io scheduler noop registered
 io scheduler anticipatory registered
 io scheduler deadline registered
 io scheduler cfq registered (default)
 Console: switching to colour frame buffer device 100x30
 mxcfb: fb registered, using mode SAMSUNG-WVGA-32
 MXC WatchDog Driver 2.0
 MXC Watchdog Timer: initial timeout 60 sec
 Serial: MXC Internal UART driver
 mxcintuart.0: ttymxc0 at MMIO 0x43f90000 (irq = 45) is a Freescale MXC
 mxcintuart.2: ttymxc2 at MMIO 0x5000c000 (irq = 18) is a Freescale MXC
 RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize
 loop: loaded (max 8 devices)
 MXC MTD nor Driver 2.0
 mxc_nor_flash: probe of mxc_nor_flash.0 failed with error -5
 MXC MTD nand Driver 2.0
 NAND device: Manufacturer ID: 0xad, Chip ID: 0xdc (Hynix NAND 512MiB 3,3V 8-bit)
 Scanning device for bad blocks
 Bad eraseblock 732 at 0x05b80000
 Bad eraseblock 1450 at 0x0b540000
 Bad eraseblock 2678 at 0x14ec0000
 Bad eraseblock 2680 at 0x14f00000
 Bad eraseblock 3981 at 0x1f1a0000
 Creating 6 MTD partitions on "NAND 512MiB 3,3V 8-bit":
 0x00000000-0x00040000 : "IPL-SPL"
 0x00040000-0x00440000 : "nand.kernel"
 0x00440000-0x00c40000 : "nand.rootfs"
 0x00c40000-0x02c40000 : "nand.userreg"
 0x02c40000-0x06c40000 : "nand.userprog"
 0x06c40000-0x20000000 : "nand.userdata"
 fsl-ehci fsl-ehci.0: Freescale On-Chip EHCI Host Controller
 fsl-ehci fsl-ehci.0: new USB bus registered, assigned bus number 1
 write priority to fc004400 302154
 iram0 = 1ffc0000 iram1 = 1ffc0800
 fsl-ehci fsl-ehci.0: irq 36, io base 0x43f88400
 fsl-ehci fsl-ehci.0: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
 usb usb1: configuration #1 chosen from 1 choice
 hub 1-0:1.0: USB hub found
 hub 1-0:1.0: 1 port detected
 Initializing USB Mass Storage driver...
 usb 1-1: new high speed USB device using fsl-ehci and address 2
 usb 1-1: configuration #1 chosen from 1 choice
 hub 1-1:1.0: USB hub found
 hub 1-1:1.0: 2 ports detected
 usb 1-1.1: new high speed USB device using fsl-ehci and address 3
 usb 1-1.1: configuration #1 chosen from 1 choice
 scsi0 : SCSI emulation for USB Mass Storage devices
 usbcore: registered new interface driver usb-storage
 USB Mass Storage support registered.
 usbcore: registered new interface driver asix
 MXC keypad loaded
 input: mxckpd as /class/input/input0
 IPU Post-filter loading
 SSI module loaded successfully
 Advanced Linux Sound Architecture Driver Version 1.0.13 (Tue Nov 28 14:07:24 2006 UTC).
 Control ALSA component registered
 MXC audio support initialized
 ALSA device list:
   #0: MXC audio for iDAM
 TCP cubic registered
 NET: Registered protocol family 1
 NET: Registered protocol family 17
 VFP support v0.3: implementor 41 architecture 1 part 20 variant b rev 2
 RAMDISK: Compressed image found at block 0
 VFS: Mounted root (ext2 filesystem).
 Freeing init memory: 472K
 Using fallback suid method
 Using fallback suid method
 Using fallback suid method
 Using fallback suid method
 #/etc/rc.d/rcS start
 Using fallback suid method
 usb_address[0] 3
 scsi 0:0:0:0: Direct-Access     Sony     MCR-U HS-MS      5.58 PQ: 0 ANSI: 0
 sd 0:0:0:0: Attached scsi removable disk sda
 scsi 0:0:0:1: Direct-Access     Sony     MCR-U HS-CF      5.58 PQ: 0 ANSI: 0
 sd 0:0:0:1: Attached scsi removable disk sdb
 scsi 0:0:0:2: Direct-Access     Sony     MCR-U HS-SD      5.58 PQ: 0 ANSI: 0
 k3d_chk_one: ejected, device sda
 k3d_chk_one: ejected, device sdb
 sd 0:0:0:2: Attached scsi removable disk sdc
 k3d_chk_one: ejected, device sdc
 ysdev: module license 'unspecified' taints kernel.
 ysdev: Yosemite misc driver (Mar 13 2008)
 GPIO port 2 (0-based), pin 31 is already reserved!
 GPIO port 2 (0-based), pin 31 is already reserved!
 EnablePA=0x01
 PA Group #0: level=13dbm, Rate Bitmap=0x1800 (54 48 Mbps)
 PA Group #1: level=14dbm, Rate Bitmap=0x7e0 (36 24 18 12 9 6 Mbps)
 PA Group #2: level=16dbm, Rate Bitmap=0x0f (11 5.5 2 1 Mbps)
 eth0      version:sd2480-9.70.3.p20-26409.p43 (r208) 
 #/usr/sony/etc/rcS start
 CLCDC_Init: major device 251
 CAMERA_Init: major device 250
 Loaded PowerVR consumer services.
 command : time

 Get time val : 1199232528
 set system clock : date 010200082008.48(1199232528)
 Wed Jan  2 00:08:48 UTC 2008
 Yostart  was started in dll [2]
 Yostar:writeing pid=1064
 Yostart with CHECK was started in dll [2]
 Yostart  was started in dll [6]
 Yostar:writeing pid=1066
 Yostart with CHECK was started in dll [6]
 ysem.c: 230: ysem_open: k != -1 failed
 ysem.c: 230: ysem_open: k != -1 failed
 Yostart  was started in dll [42]
 Yostar:writeing pid=1069
 Yostart with CHECK was started in dll [42]
 zero clear memory
 ysem.c: 230: ysem_open: k != -1 failed
 ysem.c: 230: ysem_open: k != -1 failed
 ADD 0 MTX: msgc_alive_mtx_00, SEM: msgc_result_sem_00
 Yostart  was started in dll [45]
 Yostar:writeing pid=1073
 Yostart with CHECK was started in dll [45]
 Yostart with CHECK was started in dll [30]
 Yostart  was started in dll [30]
 Yostar:writeing pid=1076
 0:08:48 PID1076 event.c( 401)event_open_mem       : failed open_share()
 Yostart  was started in dll [5]
 Yostar:writeing pid=1079
 Yostart with CHECK was started in dll [5]
 ysem.c: 230: ysem_open: k != -1 failed
 ADD 1 MTX: msgc_alive_mtx_01, SEM: msgc_result_sem_01
 Yostart  was started in dll [48]
 Yostar:writeing pid=1083
 Yostart with CHECK was started in dll [48]
 ysem.c: 230: ysem_open: k != -1 failed
 ADD 2 MTX: msgc_alive_mtx_02, SEM: msgc_result_sem_02
 [vunp] 1 hour sleep!!
 Yostart  was started in dll [49]
 Yostar:writeing pid=1091
 Yostart with CHECK was started in dll [49]
 ysem.c: 230: ysem_open: k != -1 failed
 ADD 3 MTX: msgc_alive_mtx_03, SEM: msgc_result_sem_03
 [nled] write : ledset -s -b 80 0

 [systemapi] local_time ti:0  time_st:0  time_js:3600  time_ut:0
 ontimer set event!!!!
 ontimer set event!!!!
 ontimer set event!!!!
 ontimer set event!!!!
 Yostart with CHECK was started in dll [51]
 Yostart  was started in dll [51]
 Yostar:writeing pid=1095
 ysem.c: 230: ysem_open: k != -1 failed
 ADD 4 MTX: msgc_alive_mtx_04, SEM: msgc_result_sem_04
 Yostart with CHECK was started in dll [52]
 Yostart  was started in dll [52]
 Yostar:writeing pid=1099
 Yostart with CHECK was started in dll [10]
 Yostart  was started in dll [10]
 Yostar:writeing pid=1103


 [terahttp] dll_init 
 MAIN_LOOP_START_REQ
 MAIN_LOOP_START_END
 Yostart  was started in dll [12]
 Yostar:writeing pid=1106
 Yostart with CHECK was started in dll [12]
 Yostart with CHECK was started in dll [23]
 Yostart  was started in dll [23]
 Yostar:writeing pid=1108
 pmb_start
 pmb_loop
 Message send Success. reply=1
 region_code=0x41
 mode=0x60
 WPA2-PSK CCMP
 error:[commontool.c]:L1373 -Mar 25 2009 ret=-5
 ssid=<yournetworkname>
 pairwise=CCMP
 key=<yournetworkkey>
 udhcpc (v0.9.9-pre+autoip) started
 udhcpc[1230]: udhcpc (v0.9.9-pre+autoip) started
 Sending discover...
 udhcpc[1230]: Sending discover...
 Sending select for 192.168.x.x...
 udhcpc[1230]: Sending select for 192.168.x.x...
 Lease of 192.168.x.x obtained, lease time 86400
 udhcpc[1230]: Lease of 192.168.x.x obtained, lease time 86400
 deleting routers
 route: SIOC[ADD|DEL]RT: No such process
 adding dns 192.168.y.y
 !!!enter ntp callback
 ##### ntp: get network change
 ntp set on
 Message send Success. reply=1
 0:09:00 PID1079 event.c( 969)event_api_add        : -------------------------------
 0:09:00 PID1079 event.c( 970)event_api_add        : TERAAPI_REQ_ADD  registerd ID:3 data:[0]
 0:09:00 PID1079 event.c( 971)event_api_add        : 2008/01/03(THU)10:28:26
 0:09:00 PID1079 event.c( 972)event_api_add        : -------------------------------

 Freescale Semiconductor, Inc.
 i.MX31 Applications Development System

 (none) login: terahttpd bind successfully

 Freescale Semiconductor, Inc.
 i.MX31 Applications Development System

 (none) login: 

Links