Difference between revisions of "eLinux.org:Jetson/L4T/Camera BringUp"
(Enable debug message) |
(→FAQ) |
||
Line 17: | Line 17: | ||
arm-smmu 12000000.iommu: Unhandled context fault: iova=0x00000000, fsynr=0x200011, cb=19, sid=4(0x4 - VI), pgd=0, pud=0, pmd=0, pte=0 | arm-smmu 12000000.iommu: Unhandled context fault: iova=0x00000000, fsynr=0x200011, cb=19, sid=4(0x4 - VI), pgd=0, pud=0, pmd=0, pte=0 | ||
− | + | :*Enable more log | |
sudo su | sudo su |
Revision as of 20:09, 20 December 2017
Get Prepared
- Please read through "Camera Development" section in https://developer.nvidia.com/embedded/dlc/l4t-documentation-28-1
FAQ
- Tips for debugging
- if you saw below error message
tegra-vi4 15700000.vi: PXL_SOF syncpt timeout! err = -11
- please check below 4 items in your sensor device tree, these should follow the settings in your sensor datasheet
mode0 { cil_settletime = "0"; active_w = "1920"; active_h = "1080"; embedded_metadata_height = "1";
- if you saw below message it could be the sensor output embedded data line but DT didn't declare embedded_metadata_height or it value is 0
arm-smmu 12000000.iommu: Unhandled context fault: iova=0x00000000, fsynr=0x200011, cb=19, sid=4(0x4 - VI), pgd=0, pud=0, pmd=0, pte=0
- Enable more log
sudo su kill argus_daemon nvcamera-daemon export enableCamPclLogs=1 export enableCamScfLogs=1 /usr/sbin/argus_daemon option for argus /usr/sbin/nvcamera-daemon option for gst-launch launch camera from another console